1MWh 480kW IP55 4 Guns Commercial Portable CCS2 240kw Mobile Charging Station EV DC Charger for Electric Cars

1MWh 480kW IP55 4 Guns Commercial Portable CCS2 240kw Mobile Charging Station EV DC Charger for Electric Cars

Product Overview

The MIDA 1MWh 480kW Mobile Charging Station is a commercial portable battery energy storage system delivering high-power DC fast charging through four CCS2 guns. This mobile BESS charger integrates a 1MWh LiFePO4 battery bank with a bidirectional PCS and intelligent EMS in a transportable, IP55-rated enclosure for on-demand deployment anywhere.

With up to 480kW total output and 240kW per charging point, the station simultaneously serves multiple electric cars from stored energy. Its portable design and large capacity make it ideal for temporary events, grid-constrained sites, and mobile fleet charging without permanent infrastructure.

Core Advantages

• Portable High-Power Charging – The transportable 1MWh BESS delivers 480kW total, enabling rapid deployment where fixed chargers are unavailable.
• 4-Gun Simultaneous Charging – Four CCS2 connectors charge multiple electric cars at once, with up to 240kW per point via dynamic power sharing.
• IP55 Rugged Enclosure – Weatherproof protection supports reliable outdoor operation in dust and rain.
• Peak Shaving – The EMS buffers off-peak or solar energy and discharges during peaks to reduce demand charges and grid strain.
• Liquid Cooling – Active thermal management sustains stable performance under continuous high-power operation.
• Long-Life LiFePO4 – Automotive-grade cells deliver 6000+ cycles with IEC62619-compliant safety.
• Smart EMS – Real-time monitoring and OCPP connectivity enable remote control and load management.

Product Specifications

Application Scenarios

This 1MWh portable mobile charging station is ideal for temporary events, construction sites, emergency response, fleet depots, and grid-constrained commercial locations that need high-power multi-vehicle charging on demand. Its mobility eliminates the cost and delay of permanent grid connections.

Operating as a mobile microgrid, the system supports peak shaving, solar self-consumption, and off-grid backup power, delivering flexible high-power EV charging wherever it is deployed.

After-sales Advantages

MIDA provides a comprehensive warranty, global spare-parts logistics, and remote EMS diagnostics that monitor cell health, thermal status, and charging performance in real time. Dispatch and power-sharing strategies can be tuned remotely for each deployment.

With over a decade of experience in energy storage and EV charging, MIDA delivers OEM/ODM customization, commissioning support, and long-term technical service through regional teams worldwide.

Related MIDA Charging Solutions

Explore related high-power charging equipment from MIDA: 261kwh 522kwh 240kW CCS2 DC DC EV Charger, 1MWH BESS Charging Station Level 3 Fast Portable, All in One Integrated Energy Storage System DC, Commercial Solar Energy Storage System with EV Charger.

Frequently Asked Questions (FAQ)

What is the difference between a Level 3 DC fast charger and an AC charger?

A Level 3 DC fast charger converts AC grid power to DC inside the unit and delivers it directly to the vehicle battery, bypassing the onboard charger. This enables far higher power (60kW-600kW) and much shorter charging times than AC charging, making DC fast charging ideal for highways, commercial fleets and public charging point operators.

Which connector standards does this DC charging station support?

The station supports CCS2 as standard, with CCS1, NACS (Tesla), CHAdeMO and GB/T available depending on the target market. Dual-gun models can serve two vehicles simultaneously with intelligent dynamic power sharing between the outlets.

Is the charger compatible with OCPP charging management platforms?

Yes. The charger runs OCPP 1.6J and is upgradable to OCPP 2.0.1, so it integrates with virtually any third-party charging network, billing system, RFID authentication and mobile-app payment solution.

What certifications does the DC fast charger carry?

MIDA DC chargers are built to CE standards with IP54/IP65 ingress protection, and UL/ETL versions are available for the North American market. Every unit includes over-voltage, over-current, over-temperature, leakage and surge protection.

Do you support OEM/ODM customization for DC charging stations?

Yes. As a manufacturer with over a decade of EV charging experience, MIDA offers OEM/ODM customization covering enclosure branding, power configuration, connector selection and regional certification to match each customer’s project requirements.

What after-sales support and warranty are provided?

MIDA provides a comprehensive warranty, global spare-parts supply, remote cloud diagnostics and full technical documentation, ensuring maximum uptime for fleet, highway and public charging deployments.

Related searches: 1MWh 480kW IP55 4 Guns Commercial Portable CCS2, DC fast charging station, EV charging equipment, OCPP EVSE manufacturer.