Portable EV Charger
Home EV Wallbox
DC Charger Station
BESS Charging Station
V2G V2H V2V V2L
EV Charging Module
DC Charging Connector
EV Accessories
Company News
-
Analysis of compatibility testing scheme for European standard electric vehicle charging piles based on EU AFIR regulations
This article proposes a European standard compatibility testing method based on charging characteristic analysis to address the increased heterogeneity of charging stations in Europe due to the implementation of the EU AFIR regulations. By analyzing the differences in communication protocols, e... -
Overview of CHAdeMO Standard for Charging Stations Going Global
Charge de Move “or” Ocha demo ikaga desuka “was developed by the CHAdeMO Association as the first fast charging standard. Only supports DC charging and communicates through CAN bus. CAN message Circuit topology Communication Process special function The dif... -
Charging piles going global – Understanding global charging interfaces
At present, searching for relevant charging pile interface pictures or documents online is either scattered or several years ago. This article summarizes the latest interface documents and explanations based on global charging interfaces. Communication Charging Interface 1. AC Type-1 and Type-... -
Lecture on Charging Pile Devices (V) – DC Charging Gun Cable
In the previous section, we discussed the requirements for megawatt level charging guns in the latest MCS (Megawatt Charging System: IEC TS 63379:2026) standard. At present, the megawatt charging gun has not been fully deployed and its application scenarios are limited. The charging guns used by... -
American standard charging pile certification (III) – Design details of AC piles (front end of input line and output gun head)
From the perspective of product principles, American standard AC charging stations are no different from national and European standards – they both serve as large electrical switches, conducting AC power from the grid to the onboard charger (OBC) in the vehicle, which then converts AC pow... -
American Standard Charging Pile Certification (II) – Market Access Requirements (OSHA/NRTL/ANSI)
The most obvious difference between certification in the United States and certification in other regions is the lack of a unified and specific compliance label. In China, compliant products need to be labeled with the mandatory 3C (China Compulsory Certification) mark. Power banks without this ... -
American Standard Charging Pile Certification (Part 1) – Introduction
When exporting charging stations overseas, the first thing that comes to mind is the European market and CE certification. Market Potential The European market is very large – covering a population of 400 million in 46 member states, so the demand for new energy charging piles is naturall... -
ISO 15118 Protocol Software Development Guidelines (IV) – Specific Issues for On site Charging
The previous article introduced the software implementation of the European standard CCS 15118 protocol. As is well known, in order to achieve the practical application of charging pile products, it is also an extremely important step to test the integration with real vehicle charging. This arti... -
ISO 15118 series – A standard for charging station outlets that cannot be ignored anymore
In the design and development process of charging piles in most domestic pile industries, the cost of charging piles, the appearance design of charging piles, as well as the structure (fire/IP/safety distance), performance (current and voltage accuracy), compatibility (adaptation to major car c...
