60kW 90kW DC Charger Station for Workplace and Depot Charging

The global transition to electric mobility is no longer confined to the consumer market; it has become a central strategic pillar for the modern corporation. From the electrification of executive fleets to the decarbonization of last-mile delivery operations, the demand for reliable, efficient, and appropriately scaled charging infrastructure is skyrocketing. In this corporate landscape, the “sweet spot” of DC charging has emerged in the 60kW to 90kW range. These chargers provide the perfect balance between high-speed energy delivery and infrastructure cost-effectiveness, making them the ideal choice for workplaces, commercial depots, and hospitality settings.

1. The Electrification of Logistics: A Global Commercial Imperative

In the high-stakes world of last-mile delivery and heavy-duty logistics, the transition from internal combustion engines to electric powertrains is no longer optional. MIDA Power, with its decade of engineering excellence, is at the forefront of this revolution with the 60kW 90kW DC Charger Station for Workplace and Depot Charging.

Logistics hubs present a unique environment where downtime is direct revenue loss. The 60kW 90kW DC Charger Station for Workplace and Depot Charging is engineered to meet the grueling duty cycles of urban delivery hubs, airport cargo terminals, and sea-port logistics corridors. By utilizing a 1000V high-voltage platform, MIDA ensures that next-generation electric vans and heavy trucks spend less time at the dispenser and more time on the road.

2. Technical Architecture: Inside the MIDA Power Stack

2.1 SiC MOSFET Topology and Efficiency

Traditional DC chargers often suffer from efficiency drops at partial loads. MIDA’s 60kW 90kW DC Charger Station for Workplace and Depot Charging utilizes a multi-phase interleaved topology based on Silicon Carbide (SiC) MOSFETs. This configuration achieves an industry-leading 96.5% peak efficiency, significantly reducing operational expenditure (OPEX) for depot operators.

2.2 Liquid Cooling vs. Forced Air

For high-power charging, thermal management is paramount. Our 400kW units feature a proprietary dual-mode cooling system. The power modules are housed in a sealed, IP55-rated compartment with active climate control, preventing the ingress of dust and corrosive salt air common in port environments.

3. MCS Ready: Future-Proofing the Fleet

While CCS2 is the current standard, the industry is moving toward the Megawatt Charging System (MCS). Our chargers are “MCS Ready,” meaning the internal busbar architecture and thermal management systems are designed to support a field-upgrade to the MCS connector, allowing for charging speeds in excess of 1MW when the standard is fully ratified and vehicles are available.

4. Intelligent Load Management: The AI-DES Advantage

MIDA Power’s 60kW 90kW DC Charger Station for Workplace and Depot Charging is integrated with our AI-Dynamic Energy Scheduling (AI-DES) platform. This software layer performs real-time peak shaving and load balancing across the entire depot, ensuring that the total power draw never exceeds the utility contract limit while prioritizing vehicles with the lowest State-of-Charge (SoC).